ATTENTION. Those who donated to help me go to BC...please read this - Page 4 - Scifi-Meshes.com

**al3d** · 08-07-2007, 09:20 PM

Quote:

Originally Posted by mattc

Claude has a tendency to disappear from time to time...

yeah..Right when he told me he was converting it all. that's realy good

**NightShadow** · 08-09-2007, 11:54 PM

Is it possible that, perhaps, someone else might do the conversion of the last mesh? I mean, if this guys proves to be a flake, what's the alternative? I have Deep Exploration- perhaps I can convert it to MAX using that and see if someone out there can re-texture it properly? Or, hell, maybe I can try my hand at it...?

I dunno. What I DO know is that there's a lot of people waiting out there and I'm sure their patience (and yours) is starting to wear a little thin. I could give two flips about the money- that was donated for YOU because it was necessary and you've done a lot for us here to deserve a good vacation. I'm just really damned eager to start playing with the Reliant, like, yesterday.

**al3d** · 08-10-2007, 12:33 AM

Quote:

Originally Posted by NightShadow

Is it possible that, perhaps, someone else might do the conversion of the last mesh? I mean, if this guys proves to be a flake, what's the alternative? I have Deep Exploration- perhaps I can convert it to MAX using that and see if someone out there can re-texture it properly? Or, hell, maybe I can try my hand at it...?

I dunno. What I DO know is that there's a lot of people waiting out there and I'm sure their patience (and yours) is starting to wear a little thin. I could give two flips about the money- that was donated for YOU because it was necessary and you've done a lot for us here to deserve a good vacation. I'm just really damned eager to start playing with the Reliant, like, yesterday.

don't worry..trying to figure it out, that's for sure

PixelMagic · 11-07-2007, 12:08 AM

Any update on this?

**NightShadow** · 12-22-2007, 05:32 PM

I'm curious to know... is it done yet? Has anyone inquired about it lately?

ghanima · 12-24-2007, 02:29 AM

It has been awhile...

**Viper** · 12-24-2007, 06:32 PM

Al passed on the meshes to me a while ago. I tried, but it didn't go to well, and college hindered me towards the end of the year so I ended up stop looking into it. But I'll have some free weeks now, so I'll see what can be done. I can't promise anything though, cause I have some other projects that I have to attend to in the coming weeks.

Still, this is an official "It's being looked at" message

mikala · 12-24-2007, 06:40 PM

Not to fire any flames but if you really want to see these meshes shine and can afford it, try if you can to view them in their native habitat Lightwave.
Who knows you might even enjoy the experience.
Good luck on the conversion Viper!

**NightShadow** · 12-25-2007, 05:46 AM

I've tried Lightwave. I just can't get my brain around it. MAX is quite simply more compatible with the way I'm wired, I guess. Not to worry, though- I'm a patient man. And it helps that I understand the challenges of doing a GOOD conversion. If there's anything I can do to help, let me know, Viper!

(that said, I highly doubt that I would be of any assistance, since you're the one who taught me how to do basic texturing and are leaps and bounds ahead of me in the modelling department... but the offer still does and always will stand)

NBTrekie · 02-18-2008, 08:41 AM

So, any news?

08-09-2007, 11:54 PM	#32 (permalink)
NightShadow Broken Buddy Realname: Jay Seals Join Date: May 2006 Location: Fort Campbell, KY, USA Age: 35 Posts: 672	Is it possible that, perhaps, someone else might do the conversion of the last mesh? I mean, if this guys proves to be a flake, what's the alternative? I have Deep Exploration- perhaps I can convert it to MAX using that and see if someone out there can re-texture it properly? Or, hell, maybe I can try my hand at it...? I dunno. What I DO know is that there's a lot of people waiting out there and I'm sure their patience (and yours) is starting to wear a little thin. I could give two flips about the money- that was donated for YOU because it was necessary and you've done a lot for us here to deserve a good vacation. I'm just really damned eager to start playing with the Reliant, like, yesterday.
	"Poly count is king." - Me I'm a logophile. Look it up.

11-07-2007, 12:08 AM	#34 (permalink)
PixelMagic SFM Guru Join Date: May 2006 Posts: 322	Any update on this?
PixelMagic SFM Guru Join Date: May 2006 Posts: 322

12-22-2007, 05:32 PM	#35 (permalink)
NightShadow Broken Buddy Realname: Jay Seals Join Date: May 2006 Location: Fort Campbell, KY, USA Age: 35 Posts: 672	I'm curious to know... is it done yet? Has anyone inquired about it lately?
	"Poly count is king." - Me I'm a logophile. Look it up.

12-24-2007, 02:29 AM	#36 (permalink)
ghanima SFM Guru Realname: W.Wong Join Date: Jun 2006 Location: St. Albert. Canada Posts: 191	It has been awhile...
	\| G H A N I M A \| saturnslullaby 3DWIP: if i toldja... i'd have to kill yah. [in otherwords... nothing at the moment] 3DCOMPLETE: HP Compaq nx9420 \| EXCELSIOR CLASS U.S.S. ENTERPRISE NCC-1701-B

12-24-2007, 06:32 PM	#37 (permalink)
Viper Administrator Realname: Diogo Vincenzi Join Date: May 2006 Location: Brazil Age: 22 Posts: 1,452	Al passed on the meshes to me a while ago. I tried, but it didn't go to well, and college hindered me towards the end of the year so I ended up stop looking into it. But I'll have some free weeks now, so I'll see what can be done. I can't promise anything though, cause I have some other projects that I have to attend to in the coming weeks. Still, this is an official "It's being looked at" message
	Personal website (New version up - now web developer oriented) "Chuck Norris destroyed the periodic table, because Chuck Norris only recognizes the element of surprise." Current WIP: Defiant Class - Finished

12-24-2007, 06:40 PM	#38 (permalink)
mikala SFM Guru Realname: Greg Join Date: May 2006 Location: Vancouver Canada Age: 44 Posts: 778	Not to fire any flames but if you really want to see these meshes shine and can afford it, try if you can to view them in their native habitat Lightwave. Who knows you might even enjoy the experience. Good luck on the conversion Viper!
	Important Bulletin I have nothing important to report at this time.....

12-25-2007, 05:46 AM	#39 (permalink)
NightShadow Broken Buddy Realname: Jay Seals Join Date: May 2006 Location: Fort Campbell, KY, USA Age: 35 Posts: 672	I've tried Lightwave. I just can't get my brain around it. MAX is quite simply more compatible with the way I'm wired, I guess. Not to worry, though- I'm a patient man. And it helps that I understand the challenges of doing a GOOD conversion. If there's anything I can do to help, let me know, Viper! (that said, I highly doubt that I would be of any assistance, since you're the one who taught me how to do basic texturing and are leaps and bounds ahead of me in the modelling department... but the offer still does and always will stand)
	"Poly count is king." - Me I'm a logophile. Look it up.

02-18-2008, 08:41 AM	#40 (permalink)
NBTrekie SFM Guru Realname: Jan-Hendrik Landschoof Join Date: May 2006 Location: Rendsburg, Germany Age: 24 Posts: 163	So, any news?
	Star Trek: Phase II Artwork - My little bunch of WIPs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?
Register to Participate View Forum Leaders Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read