ATTENTION. Those who donated to help me go to BC...please read this - Scifi-Meshes.com

**al3d** · 07-05-2007, 06:54 PM

OK...instead of replying to a TON of Pms and emails, i'll post this thread here.

I will asked you guys to be a bit more patient since Ace is on Vacation this week. Models should be posted either this week-end or early next week starting with the LW models naturally since those are already ready basicaly.

Max model will be posted when they are completed. So far the Falcon and Shuttles are converted to Max. i know the 1701 refit and Reliant are already on their way, but the genious behind the work is on vacation right now as well.

I will email each one of you cause haft of you did'nt mentionned in your email what model or version were asked for.

If you already donated, and are not sure to have mentionned the model required, you can always send me a mail to

alainrivard@videotron.ca, this will help me to get it done faster.

Thanks yall again and the goodies are comming

**Samurai** · 07-05-2007, 07:16 PM

Stickied for Member reference- is my Viper in the post?

**Sphynx** · 07-05-2007, 07:31 PM

A could make a Snakes on a Plane joke at this point, but that was a joke in itself.

**al3d** · 07-05-2007, 07:36 PM

Quote:

Originally Posted by Samurai

Stickied for Member reference- is my Viper in the post?

U did'nt donate you cheap bastard...LOL

**Samurai** · 07-05-2007, 10:08 PM

true, but it was worth a try.

**NightShadow** · 07-05-2007, 10:19 PM

Thanks for the update, Alain. It is very much appreciated. I don't think many of us expect any of them to be ready overnight, but knowing the status and estimated time to completion, I'm sure, helps to keep us all a few more steps away from rioting.

**JeffrySG** · 07-06-2007, 09:47 PM

Quote:

Originally Posted by Samurai

true, but it was worth a try.

lmao!

Thx for the update Alain! It's good to know the LW models will be ready first, obviously the better software goes first!

:runs and hides:

mikala · 07-07-2007, 02:06 AM

Quote:

Originally Posted by JeffrySG

lmao!

Thx for the update Alain! It's good to know the LW models will be ready first, obviously the better software goes first!

:runs and hides:

Bwahahahahahahaha!
Too funny.

GuitarEC · 07-10-2007, 09:52 PM

Al,

Where should we look to find the model once they are posted? Will a PM in the boards be delivered, or will it be posted in a forum thread somewhere?

Many thanks,

Eric "GuitarEC" C.

**Grim** · 07-11-2007, 02:30 PM

Quote:

Originally Posted by GuitarEC

Al,

Where should we look to find the model once they are posted? Will a PM in the boards be delivered, or will it be posted in a forum thread somewhere?

Many thanks,

Eric "GuitarEC" C.

Not sure if its the same across the board, but Alain kindly replied to my paypal confirmation email with a sexy 70+MB link to a very nice Colonial Viper MK2. Oh how much fun i'm going to have.

Thanks Alain you sexeh beast! Glad you had a great time at the SFDT!

07-05-2007, 06:54 PM	#1 (permalink)
al3d Mr. Speedy Join Date: May 2006 Location: Montreal Age: 42 Posts: 3,623	ATTENTION. Those who donated to help me go to BC...please read this OK...instead of replying to a TON of Pms and emails, i'll post this thread here. I will asked you guys to be a bit more patient since Ace is on Vacation this week. Models should be posted either this week-end or early next week starting with the LW models naturally since those are already ready basicaly. Max model will be posted when they are completed. So far the Falcon and Shuttles are converted to Max. i know the 1701 refit and Reliant are already on their way, but the genious behind the work is on vacation right now as well. I will email each one of you cause haft of you did'nt mentionned in your email what model or version were asked for. If you already donated, and are not sure to have mentionned the model required, you can always send me a mail to alainrivard@videotron.ca, this will help me to get it done faster. Thanks yall again and the goodies are comming
	When you love a pet, loosing it is like loosing a part of your soul. I lost part of mine on Feb 12 2008. Never will it be the same again.

07-05-2007, 07:16 PM	#2 (permalink)
Samurai This time you see Join Date: May 2006 Location: (Northern) England Posts: 4,119	Stickied for Member reference- is my Viper in the post?
	Here comes the water, It comes to wash away the sins of you and I. This time you see- like holy water, it only burns you faster than you'll ever dry.

07-05-2007, 07:31 PM	#3 (permalink)
Sphynx Divine Penguin Total Awards: 3 (more» ...) Realname: Craig Robinson Join Date: May 2006 Location: Rochester, UK Age: 39 Posts: 1,771	A could make a Snakes on a Plane joke at this point, but that was a joke in itself.
	No question is a stupid question if you don't know the answer - If you need help (and you can find us), ask the (Sens)A-Team. Personal website (updated, Mar 2007) :: Industrial-meshes.com :: Professional website (Updated, Feb 2007)

07-05-2007, 10:08 PM	#5 (permalink)
Samurai This time you see Join Date: May 2006 Location: (Northern) England Posts: 4,119	true, but it was worth a try.
	Here comes the water, It comes to wash away the sins of you and I. This time you see- like holy water, it only burns you faster than you'll ever dry.

07-05-2007, 10:19 PM	#6 (permalink)
NightShadow Broken Buddy Realname: Jay Seals Join Date: May 2006 Location: Fort Campbell, KY, USA Age: 35 Posts: 672	Thanks for the update, Alain. It is very much appreciated. I don't think many of us expect any of them to be ready overnight, but knowing the status and estimated time to completion, I'm sure, helps to keep us all a few more steps away from rioting.
	"Poly count is king." - Me I'm a logophile. Look it up.

07-10-2007, 09:52 PM	#9 (permalink)
GuitarEC SFM Nugget Realname: Eric Join Date: May 2006 Age: 34 Posts: 42	Al, Where should we look to find the model once they are posted? Will a PM in the boards be delivered, or will it be posted in a forum thread somewhere? Many thanks, Eric "GuitarEC" C.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?
Register to Participate View Forum Leaders Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read