Sith Battleship WIP - Scifi-Meshes.com

Odyssey Slipways · 06-14-2008, 03:25 PM

I tired a few times last night and a few times this morning to load these pictures and kept getting errors - i just resaved the files as jpeg's from the BMP's and they loaded up just fine (the file size per pic was too big for their liking).

so, here are 3 folders with some pictures in it from when i started this build. I thought I had some more current pictures, but didn't find any (not like there was much done since these were taken).......

I started this build back on 7-12-07 (might be 7-12-08 before i remeber to get back to it again) and thse pictures show the basic hull. it was started with 2 small dia brass tubing for the engines OdysseySlipways/4222 scale Sith Battleship/7-12-07 - Photobucket - Video and Image Hosting

in this next group of shots from 7-13-07, I cut off the tail section as I felt as they were too thick for my likings OdysseySlipways/4222 scale Sith Battleship/7-13-07 - Photobucket - Video and Image Hosting

this was the last group of shots i found on this build from 7-14-07 OdysseySlipways/4222 scale Sith Battleship/7-14-07 - Photobucket - Video and Image Hosting

i did think i had more pictures of this ship, but have yet to find them. the only progress that was made since these were taken was that more detailing tothe side of the hull was added and a few more of them raised armor plates were made.

traq · 06-14-2008, 10:30 PM

are you still working on it?

Odyssey Slipways · 06-14-2008, 11:26 PM

not recently, but i do hope to get back to it soon as i'd like to have it finished so it can be molded up for casting by this fall

overlord · 06-21-2008, 08:36 PM

did you built you 2500 Lakat master out og card or plastic???? it looks realy good

Odyssey Slipways · 06-24-2008, 03:03 AM

the Lakat is made from Evergreen sheet plastic (that white stuff)

06-14-2008, 03:25 PM	#1 (permalink)
Odyssey Slipways SFM Nugget Realname: Chris Join Date: May 2006 Location: Altoona, Pa Posts: 22	Sith Battleship WIP I tired a few times last night and a few times this morning to load these pictures and kept getting errors - i just resaved the files as jpeg's from the BMP's and they loaded up just fine (the file size per pic was too big for their liking). so, here are 3 folders with some pictures in it from when i started this build. I thought I had some more current pictures, but didn't find any (not like there was much done since these were taken)....... I started this build back on 7-12-07 (might be 7-12-08 before i remeber to get back to it again) and thse pictures show the basic hull. it was started with 2 small dia brass tubing for the engines OdysseySlipways/4222 scale Sith Battleship/7-12-07 - Photobucket - Video and Image Hosting in this next group of shots from 7-13-07, I cut off the tail section as I felt as they were too thick for my likings OdysseySlipways/4222 scale Sith Battleship/7-13-07 - Photobucket - Video and Image Hosting this was the last group of shots i found on this build from 7-14-07 OdysseySlipways/4222 scale Sith Battleship/7-14-07 - Photobucket - Video and Image Hosting i did think i had more pictures of this ship, but have yet to find them. the only progress that was made since these were taken was that more detailing tothe side of the hull was added and a few more of them raised armor plates were made.

06-14-2008, 10:30 PM	#2 (permalink)
traq SFM Guru Realname: Adrian Join Date: May 2006 Location: So Cal Age: 29 Posts: 933	are you still working on it?
	I design your custom anything * Sea Scout Ship Changing Tides I bid on Shatner's old toupee Wings3D +Kerkythea ~ WIPs! cellphone updated 4/18/08 1701-D/01 Calypso -updated 1/6/08

06-21-2008, 08:36 PM	#4 (permalink)
overlord SFM Nugget Realname: kelvin Join Date: Aug 2006 Location: england Posts: 76	did you built you 2500 Lakat master out og card or plastic???? it looks realy good
	Why won't this work !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

New To Site?	Need Help?
Register to Participate View Forum Leaders Search Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

06-14-2008, 11:26 PM	#3 (permalink)
Odyssey Slipways SFM Nugget Realname: Chris Join Date: May 2006 Location: Altoona, Pa Posts: 22	not recently, but i do hope to get back to it soon as i'd like to have it finished so it can be molded up for casting by this fall

06-24-2008, 03:03 AM	#5 (permalink)
Odyssey Slipways SFM Nugget Realname: Chris Join Date: May 2006 Location: Altoona, Pa Posts: 22	the Lakat is made from Evergreen sheet plastic (that white stuff)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)